C9200L-24PXG-4X-E C9200L 24-p 8xmGig, 16x1G, 4x10G, PoE+, أساسيات الشبكة

التفاصيل

تخصيص

Device Type Switch

24 ports – L3 – managed – stackable

Enclosure Type

Rack-mountable

Subtype Gigabit Ethernet

Ports 8 x 100/1000/2.5G/5G/10GBase-T + 16 x 10/100/1000 (PoE+) x 10 Gigabit SFP+ (uplink)

Power Over Ethernet (PoE)

PoE+

PoE Budget

740 W

Performance

Stacking bandwidth: 80 Gbps Switching capacity: 272 Gbps Forwarding rate: 214.28 Mpps

Capacity

Virtual networks: 1 IPv4 routes: 11000 IPv4 routing table entries: 3000 IPv6 routing table entries: 1500 Multicast scale: 1000 ACL scale entries: 1500 FNF entries: 16000 VLANs supported: 1024 Switched virtual interfaces (SVIs): 512 QoS hardware queues per port: 8

MAC Address Table Size

16000 entries

Jumbo Frame Support

9198 bytes

Routing Protocol

OSPF, RIP, RIP-1, RIP-2, EIGRP, VRRP, PIM-SM, EIGRP for IPv6, OSPFv3, PIM-SSM, policy-based routing (PBR), RIPng, MSTP

Remote Management Protocol

SNMP 1, RMON 1, RMON 2, SNMP 3, SNMP 2c, CLI, NETCONF, RESTCONF

Encryption Algorithm

128-bit AES

Features

Quality of Service (QoS), Cisco StackWise Technology, Rapid Per-VLAN Spanning Tree Plus (PVRST+), Shaped Round Robin (SRR), PXE support, Remote Switch Port Analyzer (RSPAN), NetFlow, Energy Efficient Ethernet, Management Information Base (MIB), Class of Service (CoS), Flexible NetFlow (FNF), 802.1x authentication, DiffServ Code Point (DSCP) support, MACsec support, 6MB packet buffer, Control plane protection (CoPP), Switched Port Analyzer (SPAN), Embedded Event Manager (EEM), Protocol Independent Multicast (PIM), First Hop Security (FHS), PVLAN support, Committed Information Rate (CIR)

Compliant Standards

IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3af, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.1s, IEEE 802.1ab (LLDP), IEEE 802.3at, IEEE 802.3bz

RAM

2 GB

Flash Memory

4 GB

Expansion / Connectivity

Interfaces 8 x 100/1000/2.5G/5G/10GBase-T RJ-45 16 x 1000Base-T RJ-45 PoE+ 4 x 10GBase-X SFP+ uplink 1 x network stack device 1 x management (LAN) RJ-45 1 x console RJ-45

Power

Power Device Internal power supply – hot-plug

Installed Qty 2 (max)

Power Redundancy Optional

Voltage Required AC

120/230 V (50 – 60 Hz)